Cordless Impact Drill Machine
Key Features
- Lithium-ion impact drill
- Voltage: 20 V
- No-load speed: 0-450/0-1900 rpm
- Max impact rate: 22500/min
- With 2 pcs 2.0 Ah battery pack
- With 1 pcs charger
- Integrated work light
- Charge volts: 220V-240V~50/60Hz
- Torque settings: 23+1+1
- With 50 pcs accessories
- Mechanical 2-speed gear
- LED battery power indicator
- Max torque: 55 NM
- Chuck capacity: 2.0-13 mm
- Packed by plastic box
Key Features
- Integrated wedge concept: friction-free, smooth, parallel wedge movement eliminates flange damage & spreading arm failure
- Unique interlocking wedge design: no first step bending and risk of slipping out of joint
- Requires very small access gap of only 0.24 inch (6 mm)
- Stepped spreader arm design: each step can spread under full load
- Few moving parts means durability and low maintenance
- Safety block SB1 included with FSC14, FSH14 and FSM8
- Ratchet spanner SW22 included with FSM8 mechanical spreader
- Single-acting cylinder included with FSH14 hydraulic spreader
Key Features
- Light weight high strength alloy body reduces its weight to half of the equivalent conventional Torque Wrenches.
- Compact in size with multiple extensions, ensures use at restricted places.
- Light Weight and Compact Packing makes handling and transportation easy. Short path actuation of gears provide clear impulse and audible signal on reaching set torque values easy and 140 Nm to 3000 Nm covered in just four models.
- Extension bars can be adjusted to get different extension length as per the operator’s requirement.
- Pin Lock mechanism at Sq. Drive for positive safe locking.
- Better than ± 3 with very high repeatability and Calibration Traceable to National Standards.
- Suitable Ratchet Adaptors available to convert to ratchet type Torque Wrench.
Key Features
- Weight : 800 g
- Material : Carbon Steel
- Model No : THS 0534
- Color : Black & Silver
- Finish Type: Steel
- Dimension: 15 x 10 x 5 cm
- Package Contains: 5 Pcs Scew Extractor in plastic storage
Key Features
- Material Body : Ductile cast iron
- Axle of the cutting whee : Special Steel
- Hardness cutting wheel : 53-64 HRc
- Color : Black & Silver
- Finish Type: Painted in Epoxi powder red color ral-2002 semi texturized
Anvil Cast Iron (Unique Xtra Tuff)
Key Features
- Unique Cast Iron Anvil, Precision Machined Grey Iron Castings
- Top surface has been machined to ensure flatness.
- Ideal for metal forming, riveting and general metal work.
- Paint Finist for corrosion resistant.
- Long Horn provides varying circumferences when you need to bend your stock.
- Size in Inches : 10, 15, 25, 30, 35, 50, 75, 100, 150
- Type : Without Steel Plate, With Steel Plate
Key Features
- 230 mm (9″) 2,200 W Angle Grinder, Large Trigger Switch
- Lightweight and compact 2,200W angle grinder with an N94 motor and has achieved weight reduction in the gear housing, etc.
- Double insulation & Excellent maneuverability
- Reduced core abrasion
- Improved leakage resistance
- Serial number label protection
- Three-position adjustable side grip for operator convenience
Key Features
- 40Vmax XGT BL AFT Cordless 150 mm (6″) Angle Grinder, Anti-Restart Function, Electric Brake, Paddle Switch
- New housing structure provides high rotation speed similar to that of corded models
- Anti-vibration construction
- Excellent maneuverability
- Active Feedback sensing Technology (AFT) turns the motor off if rotation speed suddenly slows or wheel is forced to stop
- Electric brake for maximum productivity
- Anti-restart function engineered to minimize motor start up when battery is inserted with switch locked on
